BOGO – When you buy an A/C or Furnace. Get the other free – See All Specials

Call Now for Fastest Service

(262) 223-3786

Electricians in Big Bend, WI

Electrical, Panel & Wiring Services

When the power goes out in Big Bend, most homes lose their water along with the lights, because the well pump runs on electricity. A basement near the Fox River can lose its sump pump at the same moment. Mr. Holland’s licensed electricians help Big Bend homeowners and businesses keep power dependable, with electrical repair, electrical panel upgrades, Generac standby generator installation, EV charger installation, and 24/7 emergency service. We have served Southeastern Wisconsin since 1997. Call (262) 724-2490.

Trusted Local Electricians

W204N16635 Jackson Dr, Jackson, WI 53037

(262) 223-3786

4.8on
#1 rated by the BBB

24-Hour Emergency
Service Available

icon emergency
icon emergency

24/7 Emergency Electrical Repair in Big Bend

Sparks, a burning smell, a breaker that will not reset, or half the house suddenly losing power are all signs to stop and call an emergency electrician. Mr. Holland’s is available as your 24 hour electrician for emergency electrical repair in Big Bend, day or night. Call us right away.

Our Electrical Services in Big Bend

As residential electrical contractors, we handle everything from a single GFCI outlet installation to whole-home rewiring. Big Bend’s housing ranges from homes built before 1940 to subdivisions added in the 2010s, so the right fix depends on what is already behind the walls.

Electrical Repair

Our local electricians track down tripping breakers, dead outlets, flickering lights, and circuits that stopped working after a storm. In older Big Bend homes, repairs often uncover earlier do-it-yourself wiring or two-prong outlets with no ground, and we explain what should be corrected while we are there. Our work is backed by a satisfaction guarantee.

Panel Upgrades & Replacement

Census estimates put more than four in ten Big Bend homes as built before 1960. Many houses from that period started with 60-amp or 100-amp service that was never sized for central air, a finished basement, an electric range, and an EV charger running together. An electrical panel upgrade adds capacity and breaker space, and it is often the first step before adding a standby generator or a Level 2 charger. If your home still has a fuse box, replacing it with a modern breaker panel is overdue.

Wiring & Rewiring

Wiring in pre-war homes can include knob-and-tube or cloth-insulated cable that has dried and cracked with age. Newer homes need wiring work too, usually for additions, basement finishes, detached garages, and workshops. We repair damaged wiring, rewire older homes in phases or all at once, and run dedicated circuits for appliances and shop equipment. Our team also works as your hot tub electrician and pool electrician, wiring new spas and pool equipment with the GFCI protection and disconnects they require.

Outlets, Switches & GFCIs

GFCI outlet installation protects people wherever electricity and water meet. In Big Bend, that includes basements that take on water in wet springs, garages, kitchens, bathrooms, and outdoor outlets by the patio. We also repair and replace switches and outlets, install surge protectors to shield electronics and appliances, and install and service smoke detectors.

EV Charger Installation

For Big Bend drivers who commute toward Milwaukee, Waukesha, or Mukwonago, a Level 2 home charger means starting each day with a full battery. We handle EV charger installation for Level 1 and Level 2 units, check panel capacity first, and recommend a panel upgrade only when the load calculation calls for one.

Generators

A standby generator matters more in a well-and-septic community than in a city on municipal water. Without power, a private well cannot pump water, a sump pump cannot keep up with spring runoff, and onsite wastewater systems that rely on pumps or alarms stop working too. Mr. Holland’s is a Generac PowerPro Premier dealer, the highest dealer level Generac offers, and we provide generator installation, repair, and maintenance for Big Bend homes. A standby unit starts automatically within seconds of an outage and can be sized to carry the well pump, sump pump, furnace, and refrigerator.

Lighting Installation

Recessed lighting installation is one of the most requested upgrades in Big Bend basements and kitchens, especially in older homes with a single ceiling fixture per room. We also install exterior and security lighting for driveways and detached garages, landscape and accent lighting, and wiring for ceiling fans.

Commercial Electrical

As commercial electrical contractors, we help Big Bend businesses with troubleshooting, repairs, panel and service upgrades, dedicated equipment circuits, and lighting improvements. If you are comparing commercial lighting companies for a retrofit, our electricians can handle both the fixtures and the wiring behind them, and we schedule work to limit disruption to your operation.

Electrical Financing Options in Big Bend, WI

Mr. Holland’s offers electrician financing through Service Finance Company, with $0 down, 0% interest, and no payments for up to 12 months for qualified applicants. Generator financing and financing to upgrade a circuit breaker panel are both available, along with plans for rewiring, EV chargers, lighting, and major electrical repairs. Loans carry no prepayment penalty, and there is no universal minimum credit score, so homeowners with less-than-perfect credit can still apply.

5 Reasons To Call a Big Bend Electrician

Some electrical warning signs are specific to homes that run their own well. These five deserve a call to licensed electricians.

Lights Dim When Well Pump or AC Unit Starts

A noticeable dip can point to a loose connection or service that is too small for the home’s current load.

You Lose Water Every Time the Power Goes Out

A standby generator or a dedicated well pump circuit on a transfer switch keeps water flowing during outages.

Home Still Has a Fuse Fox

Older service limits what you can add and may not meet current safety standards.

Basement, Garage, or Outdoor Outlets Have No GFCI Protection

These are the locations most likely to see water, and GFCI protection reduces shock risk.

Outlets or Switch Plates Feel Warm

Heat or discoloration often means a failing connection behind the wall and should be checked promptly.

Do You Need a Permit for Electrical Work in Big Bend?

For most projects, yes. The Village of Big Bend requires electrical permits for a wide range of work, and electrical inspections are performed by the Village’s contracted building inspector. Panel upgrades, standby generator installations, new circuits for a hot tub, pool, or EV charger, and wiring for an addition are typical examples. Wisconsin requires electrical work done for hire to be performed by state-licensed electricians, and Mr. Holland’s takes care of the permit and inspection scheduling for the work we do.

For permitting questions and correspondence, contact the Village of Big Bend Building Inspector:

  • W230 S9185 Nevins St., Big Bend, WI 53103
  • Building Inspector: (262) 364-6969
  • Village Hall: (262) 662-2747

Trusted by Your Community

4.8 (9.4k)

More Services in Big Bend, WI

Get Started With A Free Electrical Quote!